blob: 3d73e376642539fbc0409fd6037ba0754ea52cf5 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
|
# T-Modem-c1224 — BOM v0.26 (planning)
**Status:** complete **planning BOM** · PCB footprints/nets present · **not** fab release · **single-XTAL** settled
**Product:** **T-Modem-c1224** · slave `/home/akb/Code/10-PROJECTS/T-Modem-c1224/`
**License:** GNU **GPLv3** · **non-profit** · **AS-IS**
**Outline:** **180×180 mm** · routed (see vault healthcheck)
**Selection:** sicher · stabil · performant · günstig
**CSV:** [`bom/BOM.csv`](bom/BOM.csv)
**Power law:** **12 V** barrel → buck → **5 V** · **USB VBUS does not power the board** (D_OR2 = **DNI**).
**Starting material:** symbols/footprints adapted from frozen **c12s24** (separate product; not a rename).
---
## Status legend
| Status | Meaning |
|--------|---------|
| **STOCK** | On hand from classic kit / prior buy |
| **BUY** | Need for first bring-up |
| **OPTIONAL** | May ship unpopulated |
| **TBD** | Class settled · exact MPN / MHz open |
| **DNI** | Do not install / leave unconnected |
| **DEFERRED** | Do not buy yet |
| **OUT** | Explicitly not in product |
---
## 0 — Operator summary
| When | What |
|------|------|
| **STOCK** | Pico H class · DIP-16 modem socket · TCM3105-class · 16×2 LCD · AF screw · LEDs · passives · barrel jack · USB Type-A · buck module class |
| **BUY (crystal)** | Per intended rate: **Y1 = 4.4336 MHz** (flash **1200**) **or** **Y2 = 6.5536 MHz** (flash **2400**) · **8.8672 deferred** |
| **Rate model** | **One board = one flashed rate = one crystal** · other footprint **DNI** · dual footprints optional · second board for other rate |
| **Mux** | **Not required** · dual/mux path abandoned for v1.0 |
| **DNI** | **D_OR2** USB→5 V Schottky OR · unused crystal footprint |
| **OUT** | Softmodem AF path · Pi host · T-PROT · XTAL mux IC |
---
## 1 — Modem PHY (chip 1200 / 2400)
| Ref | Qty | Description | Package | Candidate | Status |
|-----|-----|-------------|---------|-----------|--------|
| SKT_MODEM | 1 | 16-pin DIP socket 0.3″ | DIP-16 7.62 mm | Generic / turned-pin | **STOCK** |
| U_MODEM | 1 | Bell-202 AFSK modem IC | DIP-16 in socket | **TCM3105** or MX614P-class | **STOCK** |
| Y1 | 0/1 | Crystal chip **1200** | HC-49 TH | **4.4336 MHz** (Amateur-PR / Bell-202) | **BUY** if 1200 board · else **DNI** |
| Y2 | 0/1 | Crystal chip **2400** | HC-49 TH | **6.5536 MHz** (field 2400) · **8.8672 deferred** | **BUY** if 2400 board · else **DNI** |
| C_Y1 | 1 | Pierce load OSC1↔GND | TH ceramic | ~22 pF class | **STOCK** / **TBD** |
| C_Y2 | 1 | Pierce load OSC2↔GND | TH ceramic | ~22 pF class · **keep** with single XTAL | **STOCK** / **TBD** |
| U_XTAL_MUX | 0 | Crystal mux / analog switch | — | **Not for v1.0** | **OUT** |
| RV_CDL | 1 | CD level trimmer | TH | Commodity | **STOCK** |
| R_TRS, R_TXR* | 1–3 | Bell-202 strap resistors | 0.25 W TH | Per frozen strap practice | **STOCK** |
Pico GPIOs **GP14/GP15** are **unused** for v1.0 (optional pin placeholders in FW). Rate = **stuffed crystal** · **one** FW image · no mux drive · dual UF2 **obsolete**.
**Stuffing:** keep both crystal footprints optional on copper; populate **only** the crystal for the intended rate; **never** stuff both in parallel. **C_Y1 + C_Y2** are the Pierce load pair for that single crystal — do **not** remove C_Y2 when leaving Y2 empty.
---
## 2 — Pico / service
| Ref | Qty | Description | Candidate | Status |
|-----|-----|-------------|-----------|--------|
| U1 | 1 | MCU module native USB UF2 | **Raspberry Pi Pico H** (headers) | **STOCK** |
| HDR_PICO_F | 2 | Female 1×20 2.54 mm | Commodity | **STOCK** |
| SW1 | 1 | BOOTSEL N.O. tactile | Omron B3F class | **STOCK** |
| TP_BOOTSEL | 1 | Test point optional | — | **OPTIONAL** |
---
## 3 — Display (shared kit)
| Ref | Qty | Description | Candidate | Status |
|-----|-----|-------------|-----------|--------|
| DSP1 | 1 | 16×2 HD44780 LCD green BL | Commodity | **STOCK** |
| HDR_LCD_F / J_LCD_I2C | 1 | Header / I²C connector | As on PCB | **STOCK** |
| U_LVL | 0/1 | BSS138-class I²C level shift | LV=3V3 · HV=5 V | **STOCK** |
| RV2 | 1 | 10 kΩ contrast | TH | **STOCK** |
| R_BL | 0/1 | Backlight series R | Per module | **STOCK** |
---
## 4 — Power (12 V primary · no USB power)
| Ref | Qty | Description | Candidate | Status |
|-----|-----|-------------|-----------|--------|
| J_DC | 1 | Barrel **5.5×2.1** centre-**positive** | CUI PJ-002A class | **STOCK** |
| U_REG | 1 | **12 V → 5 V** buck module | **Mini560 5 V** class preferred if stocked · else MP1584/LM2596 class | **STOCK** / **BUY** |
| HDR_REG | 1 | Header for buck | 2.54 mm | **STOCK** |
| D_OR1 | 1 | Schottky buck → +5 V | 1N5819 class | **STOCK** |
| D_OR2 | 0 | USB VBUS → 5 V OR | — | **DNI** |
| F1 | 1 | PTC on +5 V | ~0.5 A hold class | **STOCK** |
| C_IN | 1 | 100 µF / 25 V | radial | **STOCK** |
| C_BULK | 1 | 100 µF / 16 V on +5 V | radial | **STOCK** |
| C_BYP* | ≥8 | 100 nF decoupling | TH | **STOCK** |
| PSU_WALL | 1 | 12 V centre+ wall wart ≥0.5 A | Commodity | Not on PCB |
Silk: **12 V CENTRE +** · **USB DATA ONLY — NO VBUS POWER**.
---
## 5 — USB (data / flash / command only)
| Ref | Qty | Description | Candidate | Status |
|-----|-----|-------------|-----------|--------|
| J_USB | 1 | USB Type-A receptacle TH | Amphenol/TE/Molex class | **STOCK** |
| J_USB_PICO | 1 | Path to Pico USB (D+/D−/GND) | As designed | **STOCK** |
**Net:** `USB_VBUS_NC` — isolated · not tied to `+5V_OR` / `+5V`.
---
## 6 — AF / PTT / indicators
| Ref | Qty | Description | Candidate | Status |
|-----|-----|-------------|-----------|--------|
| J_AF | 1 | 4-pin screw 5.08 mm | `AF_TX` `AF_RX` `PTT` `GND` | **STOCK** |
| Q1 | 1 | NPN OC PTT | 2N2222A / BC547 | **STOCK** |
| R_PTT | 1 | 4.7 kΩ | TH | **STOCK** |
| RV1 | 1 | 10 kΩ TX AF level | TH | **STOCK** |
| C_TX, C_RX / C_AC* | 2 | AF AC couple | TH | **STOCK** |
| R_PAD* | 2–4 | Pad/bias | TH | **STOCK** |
| D_PROT | 0/2 | 1N4148 clamp | TH | **OPTIONAL** |
| LED_PWR, LED_PTT, LED_DCD, LED_TXRX | 4 | 3 mm LED | Commodity | **STOCK** |
| R_LED1–4 | 4 | 330 Ω–1 kΩ | TH | **STOCK** |
---
## 7 — Explicitly out of BOM
| Item | Reason |
|------|--------|
| Softmodem / DSP AFSK on Pico | Product line forbids |
| USB VBUS board power / OR diode stuffed | Power law |
| Pi host / CM108 air path | That is **384b** |
| Protocol T / T-PROT | Classic only |
| XTAL mux IC (74HCT4053 class etc.) | Dual path abandoned for v1.0 |
---
## Open TBDs
1. ~~XTAL mux topology + MPN~~ — **OUT** / abandoned
2. Final buck MPN (Mini560 5 V vs on-hand MP1584)
3. Whether strap resistors need Pico GPIO
4. Expected tones for **6.5536** path (AS-IS)
**AS-IS** · no support · no warranty.
|
