From 04d965d67a7264a1c7c211494aebda1953df7603 Mon Sep 17 00:00:00 2001 From: "info@mode42.com" Date: Fri, 7 Aug 2026 18:25:13 +0000 Subject: Initial push --- share/max25/max25-ws-proxy.service.example | 13 ++ share/max25/max25d.freebsd.bcpr.ini.example | 39 +++++ share/max25/max25d.freebsd.ini.example | 35 +++++ share/max25/max25d.freebsd.secondary.ini.example | 38 +++++ share/max25/max25d.freebsd.tmodem.ini.example | 38 +++++ share/max25/max25d.full-station.ini.example | 55 +++++++ share/max25/max25d.ini.example | 173 +++++++++++++++++++++++ share/max25/max25d.ini.host.example | 95 +++++++++++++ share/max25/max25d.main.ini.example | 27 ++++ share/max25/max25d.netdev.ini.example | 12 ++ share/max25/max25d.secondary-linux.ini.example | 46 ++++++ share/max25/max25d.service.example | 13 ++ share/max25/max25d.tmodem.ini.example | 38 +++++ share/max25/serial/README.md | 22 +++ share/max25/serial/pccom-kiss-serial.env.example | 9 ++ share/max25/serial/pktnc2-serial.env.example | 5 + share/max25/serial/tnc2c-serial.env.example | 8 ++ 17 files changed, 666 insertions(+) create mode 100644 share/max25/max25-ws-proxy.service.example create mode 100644 share/max25/max25d.freebsd.bcpr.ini.example create mode 100644 share/max25/max25d.freebsd.ini.example create mode 100644 share/max25/max25d.freebsd.secondary.ini.example create mode 100644 share/max25/max25d.freebsd.tmodem.ini.example create mode 100644 share/max25/max25d.full-station.ini.example create mode 100644 share/max25/max25d.ini.example create mode 100644 share/max25/max25d.ini.host.example create mode 100644 share/max25/max25d.main.ini.example create mode 100644 share/max25/max25d.netdev.ini.example create mode 100644 share/max25/max25d.secondary-linux.ini.example create mode 100644 share/max25/max25d.service.example create mode 100644 share/max25/max25d.tmodem.ini.example create mode 100644 share/max25/serial/README.md create mode 100644 share/max25/serial/pccom-kiss-serial.env.example create mode 100644 share/max25/serial/pktnc2-serial.env.example create mode 100644 share/max25/serial/tnc2c-serial.env.example (limited to 'share/max25') diff --git a/share/max25/max25-ws-proxy.service.example b/share/max25/max25-ws-proxy.service.example new file mode 100644 index 0000000..7620ac9 --- /dev/null +++ b/share/max25/max25-ws-proxy.service.example @@ -0,0 +1,13 @@ +[Unit] +Description=MAX25 WebSocket forward-proxy (M25/1 bridge) +Documentation=file:$PREFIX/share/max25/reverse-proxy/README.txt +After=network.target max25d.service +Wants=max25d.service + +[Service] +Type=simple +ExecStart=/usr/local/bin/max25-ws-proxy -c /etc/max25/web-proxy.ini +Restart=on-failure + +[Install] +WantedBy=multi-user.target diff --git a/share/max25/max25d.freebsd.bcpr.ini.example b/share/max25/max25d.freebsd.bcpr.ini.example new file mode 100644 index 0000000..5789e15 --- /dev/null +++ b/share/max25/max25d.freebsd.bcpr.ini.example @@ -0,0 +1,39 @@ +; max25d — FreeBSD + PC-COM / max25-bcpr (ExSys cuau2 default) +; Copy: cp share/max25/max25d.freebsd.bcpr.ini.example /usr/local/etc/max25/max25d.ini +; Start bcpr first: max25-bcpr-ctl start --ini /usr/local/etc/max25/max25-bcpr.ini + +[features] +baycom = no +pccom = no +max25_bcpr = yes +tmodem = no + +[daemon] +mode = standalone +hardware = tncs +device = max25e0 +; user = akb +; group = dialer + +[devices] +default = max25e0 +max25e0 = max25-bcpr:bc0 + +[network] +tcp_host = 0.0.0.0 +tcp_port = 7325 +unix_socket = /var/run/max25/modem.sock +tcp_password = + +[modem] +callerid = CB-0 +callid = QST +ax25_ui = yes + +[stack] +auto_start = yes +serial_watch = no + +[device.max25e0] +kiss_link = /tmp/max25-bcpr/kiss-bc0 +max25_bcpr_ini = /usr/local/etc/max25/max25-bcpr.ini diff --git a/share/max25/max25d.freebsd.ini.example b/share/max25/max25d.freebsd.ini.example new file mode 100644 index 0000000..4a913f9 --- /dev/null +++ b/share/max25/max25d.freebsd.ini.example @@ -0,0 +1,35 @@ +; MAX25-Stack — FreeBSD Secondary (CRDOP/OSS, modular TCP/IP service) +; Copy: cp share/max25/max25d.freebsd.ini.example /usr/local/etc/max25/max25d.ini +; Audio: pkg install sox — set capture/playback in share/crdop/crdop.freebsd.ini.example + +[daemon] +mode = standalone +hardware = soft-modems +device = soft-crdop + +[devices] +default = soft-crdop +soft-crdop = crdop:default + +[device.soft-crdop] +host = 127.0.0.1 +port = 8515 + +[modular_tcp] +enabled = yes +role = secondary +service_name = modular-tcp-server +instance_id = secondary-1 + +[network] +tcp_host = 0.0.0.0 +tcp_port = 7326 +unix_socket = /var/run/max25/modem.sock + +[modem] +callerid = CB-0 +callid = QST +ax25_ui = yes + +[stack] +auto_start = yes diff --git a/share/max25/max25d.freebsd.secondary.ini.example b/share/max25/max25d.freebsd.secondary.ini.example new file mode 100644 index 0000000..7c781fe --- /dev/null +++ b/share/max25/max25d.freebsd.secondary.ini.example @@ -0,0 +1,38 @@ +; max25d — FreeBSD Secondary (PC-COM / max25-bcpr) +; Use with Main tmodem @ :7325 — one RF backend per max25d. +; Copy: cp share/max25/max25d.freebsd.secondary.ini.example /usr/local/etc/max25/max25d-secondary.ini +; Start bcpr first: max25-bcpr-ctl start --ini /usr/local/etc/max25/max25-bcpr.ini + +[features] +baycom = no +pccom = no +max25_bcpr = yes +tmodem = no + +[daemon] +mode = standalone +hardware = tncs +device = max25e0 + +[devices] +default = max25e0 +max25e0 = max25-bcpr:bc0 + +[network] +tcp_host = 0.0.0.0 +tcp_port = 7327 +unix_socket = /var/run/max25/modem-secondary.sock +tcp_password = + +[modem] +callerid = CB-0 +callid = QST +ax25_ui = yes + +[stack] +auto_start = yes +serial_watch = no + +[device.max25e0] +kiss_link = /tmp/max25-bcpr/kiss-bc0 +max25_bcpr_ini = /usr/local/etc/max25/max25-bcpr.ini diff --git a/share/max25/max25d.freebsd.tmodem.ini.example b/share/max25/max25d.freebsd.tmodem.ini.example new file mode 100644 index 0000000..e4537e2 --- /dev/null +++ b/share/max25/max25d.freebsd.tmodem.ini.example @@ -0,0 +1,38 @@ +; max25d — FreeBSD + T-Modem-c1224 USB KISS (prototype) +; Copy: cp share/max25/max25d.freebsd.tmodem.ini.example /usr/local/etc/max25/max25d.ini +; Device: /dev/cuaU0 (callout) — adjust uhub / by-id symlink as needed. + +[features] +baycom = no +pccom = no +max25_bcpr = no +tmodem = yes + +[daemon] +mode = standalone +hardware = tncs +device = tmodem + +[devices] +default = tmodem +tmodem = /dev/cuaU0 + +[network] +tcp_host = 0.0.0.0 +tcp_port = 7325 +unix_socket = /var/run/max25/modem.sock +tcp_password = + +[modem] +callerid = CB-0 +callid = QST +ax25_ui = yes + +[stack] +auto_start = yes +serial_watch = no + +[serial.tmodem] +baud = 115200 +line = 8n1 +dtr_rts = no diff --git a/share/max25/max25d.full-station.ini.example b/share/max25/max25d.full-station.ini.example new file mode 100644 index 0000000..5a2d197 --- /dev/null +++ b/share/max25/max25d.full-station.ini.example @@ -0,0 +1,55 @@ +; DEPRECATED for new Linux sites — heterogeneous multi-id station (legacy only). +; Policy: one RF device per max25d host. Use separate Linux hosts for additional radios. +; See docs/ARCHITECTURE.md § Linux host policy — one RF device. +; +; Full heterogeneous station - TNC2C + PK-TNC2 + BayCom/based (max25e0/bcpr) + CRDOP +; Copy to /etc/max25/max25d.ini and adjust paths for your site. +; BayCom + CRDOP backends are architecturally wired; live RF may be untested. + +[daemon] +mode = standalone +hardware = tncs +device = tnc2c + +[devices] +default = tnc2c +tnc2c = /dev/ttyS4 +pktnc2 = /dev/ttyS5 +; baycom-ser12 = baycom:a ; LEGACY kernel - prefer max25e0 = max25-bcpr:bc0 +soft-crdop = crdop:default + +[network] +tcp_host = 0.0.0.0 +tcp_port = 7325 +unix_socket = /run/max25/modem.sock +tcp_password = + +[modem] +callerid = CB-0 +callid = QST +ax25_ui = yes + +[stack] +auto_start = yes + +[serial.tnc2c] +baud = 19200 +line = 8n1 +dtr_rts = yes +kiss_entry = kiss_on + +[serial.pktnc2] +baud = 9600 +line = 8n1 +dtr_rts = no +kiss_entry = auto + +[device.baycom-ser12] +kiss_link = /var/run/baycom-pr/kiss +modem = a +baycom_ini = /etc/baycom/baycom-pr.ini + +[device.soft-crdop] +host = 127.0.0.1 +port = 8515 +listen = yes diff --git a/share/max25/max25d.ini.example b/share/max25/max25d.ini.example new file mode 100644 index 0000000..fdac117 --- /dev/null +++ b/share/max25/max25d.ini.example @@ -0,0 +1,173 @@ +; MainAX25-Stack — max25d daemon (Linux only) +; Copy to /etc/max25/max25d.ini or pass MAX25D_INI= + +[features] +; PC-COM / SER12: max25-bcpr userspace (BayCom/based). Kernel baycom = legacy. +baycom = yes +pccom = yes +max25_bcpr = yes +; T-Modem-c1224 USB KISS half-TNC (Pico) — off unless stuffed +tmodem = no + +[daemon] +; Operating mode: standalone | service | hybbx-main | hybbx-cohost | hybbx-host +; HyBBX attach (release serial/KISS to hybbxd): hybbx-main | hybbx-cohost | hybbx-host +; or [hybbx] release_attach=yes on standalone +mode = standalone +; Drop to unprivileged user after stack prep (when started as root via run-max25d.sh) +; user = max25 +; group = max25 +; Default hardware when per-device hardware= is omitted +hardware = tncs +; Legacy single-device id (used when [devices] is absent) +device = tnc2c + +[devices] +; Linux host: ONE RF device per max25d (design rule). Pick one id below. +; Layout examples still under design — do not enable two backends on one host. +; Serial path, baycom:, or crdop: +default = tnc2c +tnc2c = /dev/ttyS4 +; pktnc2 = /dev/ttyS5 +; --- PC-COM / BayCom/based: max25-bcpr userspace SER12 (default product path) --- +; Uncomment ONE RF device — max25e0 for PC-COM on ttyS0 (adjust serial in max25-bcpr.ini) +; default = max25e0 +; max25e0 = max25-bcpr:bc0 +; baycom-kiss = /dev/ttyUSB0 +; pccom-kiss = /dev/ttyUSB0 +; baycom-ser12 = baycom:a ; LEGACY kernel path — avoid +; soft-crdop = crdop:default +; --- T-Modem-c1224 USB KISS half-TNC (not BayCom/based) --- +; tmodem = yes ; under [features] +; tmodem = /dev/ttyACM0 +; Acoustic bench (loopback / ALSA sniff / host daemon): +; audio-dummy = audio:loopback +; enabled = tnc2c ; optional — single id recommended + +[network] +; Terminal clients connect here (TCP). Unix socket always enabled on Linux. +tcp_host = 0.0.0.0 +tcp_port = 7325 +unix_socket = /run/max25/modem.sock +; Plain-text TCP auth for remote terminals (empty = disabled; Unix socket exempt) +tcp_password = + +[modem] +; Default IDs — terminal may override live (session scope) +callerid = CB-0 +callid = QST +; Send lines as AX.25 UI when yes (CRDOP uses native AX.25 UI display when ax25_ui=yes) +ax25_ui = yes +; Banned AX.25 source callsigns — silent RX drop (one per line in file) +; bans_file = /etc/max25/bans.txt + +[reporting] +; Client-visible error/voice telemetry in STATUS (and EVENT on decode failure). +; yes = participate in STATUS; no = always report invalid for that field. +error_transmissions = yes +voice_transmissions = yes +; Data quality: N timed passes (good/bad only; voice/noise ignored), min % good. +; Each pass lasts up to data_pass_seconds (default 20s); full cycle = 3 × 20s. +data_passes = 3 +data_quality_min = 50 +data_pass_seconds = 20 + +[stack] +; Auto-start hardware on daemon start (boot-wait / baycom-pr-ctl / crdopc per device) +auto_start = yes +; TNC serial stability: periodic probe + software recovery (power-cycle stays rescue-only) +serial_watch = yes +serial_watch_interval = 60 +serial_repair_cooldown = 20 +serial_watch_startup_grace = 45 +; max25d uses --recover-only for TNC stack prep (no power cycle on daemon start) +stack_recover_only = yes +stack_retry_interval = 120 +; After N inline repair failures (error-host), escalate to boot-wait subprocess +serial_bootwait_escalate = yes +serial_bootwait_escalate_after = 3 +serial_bootwait_escalate_cooldown = 300 + +; Software TOT (host policy for max25-bcpr / BayCom/based — not radio TOT) +; Synced into max25-bcpr.ini on stack start. Trip → stop bcpr, tot-paused, auto recover. +[tot] +enabled = yes +max_key_sec = 25 +min_gap_sec = 1.5 +max_consecutive = 3 +max_bursts = 8 +recover_sec = 300 + +; Detached operator session (CLI — not parsed from ini): +; max25d --session tmux -c /etc/max25/max25d.ini +; max25d session start --tmux +; max25d-session attach +; Env: MAX25D_SESSION=max25d MAX25D_SESSION_BACKEND=tmux|screen + +[serial] +; Legacy single-device overrides — ignored when [devices] is present. +; device = /dev/ttyS4 +; baud = 19200 +; line = 8n1 +; dtr_rts = yes +; kiss_entry = kiss_on + +[serial.tnc2c] +; Per-device serial profile (optional — defaults from stacks/tncs/tnc2c-serial.env) +; baud = 19200 +; line = 8n1 +; dtr_rts = yes +; kiss_entry = kiss_on + +[serial.pktnc2] +; pktnc2: 9600 8N1, DTR+RTS off, kiss_entry=auto +; baud = 9600 +; line = 8n1 +; dtr_rts = no +; kiss_entry = auto + +[serial.tmodem] +; T-Modem-c1224 USB CDC KISS half-TNC (not BayCom/based) +; baud = 115200 +; line = 8n1 +; dtr_rts = no + +; --- BayCom kernel (LEGACY — prefer bcpr above) --- +; baycom-ser12 = baycom:a +; [device.baycom-ser12] +; kiss_link = /var/run/baycom-pr/kiss +; modem = a +; baycom_ini = /etc/baycom/baycom-pr.ini + +; --- max25-bcpr device block (when max25e0 enabled above) --- +; [device.max25e0] +; kiss_link = /tmp/max25-bcpr/kiss-bc0 +; max25_bcpr_ini = /etc/max25/max25-bcpr.ini +; ipv4 = 127.0.0.25/8 +; ipv6 = ::25/128 +; Forks max25e0:bcN inherit ipv4/ipv6 from max25e0 unless overridden. +; Built by default (MAX25_BUILD_MAX25_BCPR=ON). See share/max25-bcpr/max25-bcpr.ini.example + +; --- HyBBX co-host / standalone attach (max25d preps, HyBBX opens KISS) --- +; [hybbx] +; release_attach = yes + +; --- USB/async BayCom KISS serial --- +; [serial.baycom-kiss] +; baud = 9600 +; line = 8n1 +; dtr_rts = no + +; --- CRDOP sound-card modem (MAX25-SoftModem) --- +; [device.soft-crdop] +; host = 127.0.0.1 +; port = 8515 +; listen = yes + +; --- Virtual IP netdev (TUN max25d0 — planned near term) --- +; Full doc: docs/NETDEV.md · interface name is always max25d0 +; [netdev] +; enabled = no +; mode = tun +; ipv4 = 127.0.0.25/8 +; ipv6 = ::25/128 diff --git a/share/max25/max25d.ini.host.example b/share/max25/max25d.ini.host.example new file mode 100644 index 0000000..fc05b9d --- /dev/null +++ b/share/max25/max25d.ini.host.example @@ -0,0 +1,95 @@ +; MainAX25-Stack — max25d Linux host (example setup) +; Copy: sudo cp share/max25/max25d.ini.host.example /etc/max25/max25d.ini +; Unified workflow: docs/PLUGINS-DEVICE-MODEL.md +; +; Example onboard-UART map (single BayCom — no dual on this layout): +; /dev/ttyS0 BayCom PC-COM (kernel-ser12) — Path B below +; /dev/ttyS4 TNC2C (packet_radio) — Path A (default) +; /dev/ttyS5 PK-TNC2 (packet_radio) — NOT BayCom +; +; Enable exactly ONE hardware path: comment out Path A [devices] when switching to B or C. + +[daemon] +mode = standalone +; Path A (default): TNC2C on ttyS4 +hardware = tncs +device = tnc2c +; Path B BayCom: hardware = modems · device = max25e0 +; Path C CRDOP: hardware = soft-modems · device = soft-crdop + +[network] +; Listen on all interfaces — remote max25-terminal over LAN +tcp_host = 0.0.0.0 +tcp_port = 7325 +; systemd RuntimeDirectory=max25 → /run/max25/modem.sock +unix_socket = /run/max25/modem.sock +; Set a password before exposing tcp_host = 0.0.0.0 on LAN +tcp_password = changeme + +[modem] +callerid = CB-0 +callid = QST +ax25_ui = yes +; Banned AX.25 source callsigns — silent RX drop (one per line in file) +; bans_file = /etc/max25/bans.txt + +[reporting] +error_transmissions = yes +voice_transmissions = yes +data_passes = 3 +data_quality_min = 50 +data_pass_seconds = 20 + +[stack] +; Starts max25-ctl stack on daemon boot (recover-only for TNC — no power cycle) +auto_start = yes +serial_watch = yes +serial_watch_interval = 60 +stack_recover_only = yes +serial_bootwait_escalate = yes +serial_bootwait_escalate_after = 3 + +; --- Path A: TNC2C (default host) --- +[devices] +default = tnc2c +tnc2c = /dev/ttyS4 + +[serial.tnc2c] +baud = 19200 +line = 8n1 +dtr_rts = yes +kiss_entry = kiss_on + +; Second TNC — not on same Linux host (use another machine): +; pktnc2 = /dev/ttyS5 +; [serial.pktnc2] +; baud = 9600 +; line = 8n1 +; dtr_rts = no +; kiss_entry = auto + +; --- Path B: BayCom PC-COM (single modem on ttyS0) --- +; Comment Path A [devices] + [serial.tnc2c] above, then uncomment: +; [devices] +; default = max25e0 +; baycom-ser12 = baycom:a +; [device.baycom-ser12] +; kiss_link = /var/run/baycom-pr/kiss +; modem = a +; baycom_ini = /etc/baycom/baycom-pr.ini +; Prep: sudo cp share/baycom/baycom-pr.pccom-ttyS0-only.ini.example /etc/baycom/baycom-pr.ini +; sudo baycom-pr-ctl -c /etc/baycom/baycom-pr.ini setup + +; --- Path C: CRDOP sound-card modem (CB profile) --- +; Comment Path A [devices] above, set [daemon] soft-modems/soft-crdop, then uncomment: +; [devices] +; default = soft-crdop +; soft-crdop = crdop:default +; [device.soft-crdop] +; host = 127.0.0.1 +; port = 8515 +; listen = yes +; Prep: cp stacks/crdop/share/crdop.ini.example ~/.config/crdop/crdop.ini (CB / 500MAX) + +; Serial env search: /etc/max25/ → local/ → share/max25/serial/ → stacks/tncs/ +; USB TNC example: tnc2c = /dev/ttyUSB0 (edit [serial.tnc2c] or tnc2c-serial.env) diff --git a/share/max25/max25d.main.ini.example b/share/max25/max25d.main.ini.example new file mode 100644 index 0000000..86dd292 --- /dev/null +++ b/share/max25/max25d.main.ini.example @@ -0,0 +1,27 @@ +; MAX25-Stack — Modular TCP/IP Servers Service — Main (central router) +; No local RF required on Main — Secondaries own CRDOP/devices. +; Typical split: Main on FreeBSD; list FreeBSD CRDOP + remote Linux Secondaries below. +; Copy: cp share/max25/max25d.main.ini.example /usr/local/etc/max25/max25d.ini + +[daemon] +mode = service +hardware = soft-modems +device = soft-crdop + +[modular_tcp] +enabled = yes +role = main +service_name = modular-tcp-server +; secondaries = 127.0.0.1:7326,linux-host.example:7327 + +[modular_tcp.secondaries] +secondary-1 = 127.0.0.1:7326 +; secondary-linux-1 = linux-host.example:7327 + +[network] +tcp_host = 0.0.0.0 +tcp_port = 7325 +unix_socket = + +[stack] +auto_start = no diff --git a/share/max25/max25d.netdev.ini.example b/share/max25/max25d.netdev.ini.example new file mode 100644 index 0000000..f8f147c --- /dev/null +++ b/share/max25/max25d.netdev.ini.example @@ -0,0 +1,12 @@ +; Defaults match [device.max25e0] ipv4/ipv6 (127.0.0.25/8, ::25/128). +; MAX25 virtual netdev (TUN) — merge into max25d.ini +; Planned: max25-tun sidecar creates interface max25d0 (fixed name) + +[netdev] +enabled = no +; interface = max25d0 ; always max25d0 — do not change +mode = tun +ipv4 = 127.0.0.25/8 +ipv6 = ::25/128 +encap = ax25-ui +m25_unix = /run/max25/modem.sock diff --git a/share/max25/max25d.secondary-linux.ini.example b/share/max25/max25d.secondary-linux.ini.example new file mode 100644 index 0000000..180e5b0 --- /dev/null +++ b/share/max25/max25d.secondary-linux.ini.example @@ -0,0 +1,46 @@ +; MAX25-Stack — Linux Secondary (hardware TNC, modular TCP/IP service) +; Use when FreeBSD hosts Main + CRDOP — this Linux host extends RF only. +; Copy: cp share/max25/max25d.secondary-linux.ini.example /etc/max25/max25d.ini +; Register instance_id + host:port in FreeBSD Main [modular_tcp.secondaries]. + +[features] +baycom = no +pccom = no + +[daemon] +mode = service +hardware = tncs +device = tnc2c + +[devices] +default = tnc2c +tnc2c = /dev/ttyS4 +; max25e0 = max25-bcpr:bc0 ; BayCom/based via bcpr +; baycom-ser12 = baycom:default ; LEGACY kernel — prefer max25e0 + +[modular_tcp] +enabled = yes +role = secondary +service_name = modular-tcp-server +instance_id = secondary-linux-1 + +[network] +tcp_host = 0.0.0.0 +tcp_port = 7327 +unix_socket = /run/max25/modem.sock + +[modem] +callerid = CB-0 +callid = QST +ax25_ui = yes + +[stack] +auto_start = yes + +; [device.baycom-ser12] ; LEGACY — prefer [device.max25e0] +kiss_link = /var/run/baycom-pr/kiss +baycom_ini = /etc/baycom/baycom-pr.ini + +; Optional TUN on Linux Secondary — interface name max25d0 only +; [netdev] +; enabled = no diff --git a/share/max25/max25d.service.example b/share/max25/max25d.service.example new file mode 100644 index 0000000..e3281fb --- /dev/null +++ b/share/max25/max25d.service.example @@ -0,0 +1,13 @@ +[Unit] +Description=MAX25 daemon (MainAX25-Stack) +After=network.target + +[Service] +Type=simple +ExecStart=/usr/local/bin/max25d -c /etc/max25/max25d.ini +Restart=on-failure +RuntimeDirectory=max25 +# Unix socket: /run/max25/modem.sock (writable when RuntimeDirectory=max25) + +[Install] +WantedBy=multi-user.target diff --git a/share/max25/max25d.tmodem.ini.example b/share/max25/max25d.tmodem.ini.example new file mode 100644 index 0000000..7302625 --- /dev/null +++ b/share/max25/max25d.tmodem.ini.example @@ -0,0 +1,38 @@ +; max25d — T-Modem-c1224 USB KISS half-TNC (prototype) +; Copy toward /etc/max25/max25d.ini or pass MAX25D_INI= +; RX before TX for any live RF test. + +[features] +baycom = no +pccom = no +max25_bcpr = no +tmodem = yes + +[daemon] +mode = standalone +hardware = tncs +device = tmodem + +[devices] +default = tmodem +tmodem = /dev/ttyACM0 + +[network] +tcp_host = 0.0.0.0 +tcp_port = 7325 +unix_socket = /run/max25/modem.sock +tcp_password = + +[modem] +callerid = CB-0 +callid = QST +ax25_ui = yes + +[stack] +auto_start = yes +serial_watch = no + +[serial.tmodem] +baud = 115200 +line = 8n1 +dtr_rts = no diff --git a/share/max25/serial/README.md b/share/max25/serial/README.md new file mode 100644 index 0000000..aa05b1c --- /dev/null +++ b/share/max25/serial/README.md @@ -0,0 +1,22 @@ +# Per-device serial env (max25d / boot-wait) + +Install copies for site-specific paths: + +```bash +sudo mkdir -p /etc/max25 +sudo cp share/max25/serial/tnc2c-serial.env.example /etc/max25/tnc2c-serial.env +# edit device path and baud +``` + +Search order (`paths.py`): `/etc/max25/` → `local/` → `share/max25/serial/` → `stacks/tncs/`. + +**Other device families** use different site config (same `[devices]` pattern in `max25d.ini`): + +| Hardware | Site config (not serial env) | +|----------|------------------------------| +| BayCom/based (`max25e0` / bcpr) | `share/baycom/baycom-pr.pccom-ttyS0-only.ini.example` → `/etc/baycom/baycom-pr.ini` | +| CRDOP (`soft-crdop`) | `stacks/crdop/share/crdop.ini.example` | + +Unified workflow: [docs/PLUGINS-DEVICE-MODEL.md](../../docs/PLUGINS-DEVICE-MODEL.md). + +Terminal client profiles (connection only): [`../clients/`](../clients/README.md). diff --git a/share/max25/serial/pccom-kiss-serial.env.example b/share/max25/serial/pccom-kiss-serial.env.example new file mode 100644 index 0000000..6fbbe00 --- /dev/null +++ b/share/max25/serial/pccom-kiss-serial.env.example @@ -0,0 +1,9 @@ +# PC-COM / USB KISS serial — copy to /etc/max25/pccom-kiss-serial.env +# Used by max25d devices pccom-kiss and baycom-kiss (kiss-raw-serial backend). +# Stable path preferred: /dev/serial/by-id/usb-... +PCCOM_KISS_DEV=/dev/ttyUSB0 +PCCOM_KISS_BAUD=9600 +PCCOM_KISS_LINE=8n1 +PCCOM_KISS_DTR_RTS=no +PCCOM_KISS_RADIO_BAUD=1200 +HYBBX_SERIAL_LINE=8n1 diff --git a/share/max25/serial/pktnc2-serial.env.example b/share/max25/serial/pktnc2-serial.env.example new file mode 100644 index 0000000..ba25cc7 --- /dev/null +++ b/share/max25/serial/pktnc2-serial.env.example @@ -0,0 +1,5 @@ +# PK-TNC2 serial — copy to /etc/max25/pktnc2-serial.env +# Example: onboard UART /dev/ttyS5 +PKTNC2_DEV=/dev/ttyS5 +PKTNC2_BAUD=9600 +PKTNC2_LINE=8n1 diff --git a/share/max25/serial/tnc2c-serial.env.example b/share/max25/serial/tnc2c-serial.env.example new file mode 100644 index 0000000..10b2576 --- /dev/null +++ b/share/max25/serial/tnc2c-serial.env.example @@ -0,0 +1,8 @@ +# TNC2C serial — copy to /etc/max25/tnc2c-serial.env +# Example: onboard UART /dev/ttyS4 +TNC2C_DEV=/dev/ttyS4 +TNC2C_BAUD=19200 +TNC2C_LINE=8n1 +TNC2C_RADIO_BAUD=2400 +TNC2C_MODEM=tcm3105 +HYBBX_SERIAL_LINE=8n1 -- cgit v1.3.1