From fa05a5f8238e9e1417235711656e5062ccc843a7 Mon Sep 17 00:00:00 2001
From: "info@mode42.com" <info@mode42.com>
Date: Fri, 7 Aug 2026 18:23:28 +0000
Subject: Initial push

---
 share/max25-bcpr/max25-bcpr.freebsd.ini.example | 34 +++++++++++++++++++
 share/max25-bcpr/max25-bcpr.ini.example         | 44 +++++++++++++++++++++++++
 2 files changed, 78 insertions(+)
 create mode 100644 share/max25-bcpr/max25-bcpr.freebsd.ini.example
 create mode 100644 share/max25-bcpr/max25-bcpr.ini.example

(limited to 'share/max25-bcpr')

diff --git a/share/max25-bcpr/max25-bcpr.freebsd.ini.example b/share/max25-bcpr/max25-bcpr.freebsd.ini.example
new file mode 100644
index 0000000..c16bf3a
--- /dev/null
+++ b/share/max25-bcpr/max25-bcpr.freebsd.ini.example
@@ -0,0 +1,34 @@
+; max25-bcpr — FreeBSD AM1 / ExSys OXuPCI952 (cuau2 @ 0xd090)
+; Copy: cp share/max25-bcpr/max25-bcpr.ini.example /usr/local/etc/max25/max25-bcpr.ini
+; Live: dry_run=no · max25-bcpr-ctl start --ini /usr/local/etc/max25/max25-bcpr.ini
+
+[max25-bcpr]
+dry_run = yes
+state_dir = /tmp/max25-bcpr
+; user = akb
+; group = dialer
+; ptt_wd = yes
+; ptt_wd_key_ms = 14500
+; ptt_wd_pause_ms = 500
+; txd_bias = pulse
+
+[bc0]
+enabled = yes
+serial = /dev/cuau2
+iobase = 0xd090
+irq = 36
+mode = ser12*
+kiss_link = /tmp/max25-bcpr/kiss-bc0
+baud = 1200
+tx_delay = 35
+tx_tail = 2
+slottime = 10
+ppersist = 40
+fulldup = no
+
+; [bc1]
+; enabled = no
+; serial = /dev/cuau3
+; iobase = 0xd080
+; irq = 36
+; kiss_link = /tmp/max25-bcpr/kiss-bc1
diff --git a/share/max25-bcpr/max25-bcpr.ini.example b/share/max25-bcpr/max25-bcpr.ini.example
new file mode 100644
index 0000000..b75a91a
--- /dev/null
+++ b/share/max25-bcpr/max25-bcpr.ini.example
@@ -0,0 +1,44 @@
+; max25-bcpr — BayCom/based PC-COM SER12 (userspace, MAX25)
+; Public mark: BayCom/based. Never Konverter/converter.
+; Product: BayCom/based PC-COM SER12 (userspace, MAX25). Built by default (MAX25_BUILD_MAX25_BCPR=ON).
+; Hardware: TCM3105-class AFSK modem chip (bits↔tones + PTT). Not a TNC/digi/BBX.
+; Host (max25-bcprd / max25d) owns HDLC, KISS, bit clock → device max25e0 (:bcN forks).
+; Internal C API may still use bcpr_* symbols — product face is max25-bcpr only.
+;
+; Quick start (offline, after -DMAX25_BUILD_MAX25_BCPR=ON):
+;   max25-bcprd -c stacks/max25-bcpr/share/max25-bcpr.ini.example --dry-run --once
+; Live: copy to /etc/max25/max25-bcpr.ini or ./local/max25-bcpr.ini; set dry_run=no.
+
+[max25-bcpr]
+dry_run = yes
+state_dir = /tmp/max25-bcpr
+; FlexNet SER12 PTT watchdog (cal / long key): unkey ~500 ms every ~14.5 s
+; ptt_wd = yes
+; ptt_wd_key_ms = 14500
+; ptt_wd_pause_ms = 500
+; TXD pump: pulse = Sailer THR 0x00 (default); steady = UART break (TFPCX-class)
+; txd_bias = pulse
+; Software TOT (max25d [tot] syncs these on stack start; override per site if needed)
+; tot = yes
+; tot_max_key_sec = 25
+; tot_min_gap_ms = 1500
+; tot_max_consecutive = 3
+; tot_max_bursts = 8
+
+[bc0]
+enabled = yes
+serial = /dev/ttyS0
+; iobase / irq — set to real values for live use
+mode = ser12*
+kiss_link = /tmp/max25-bcpr/kiss-bc0
+baud = 1200
+tx_delay = 35
+tx_tail = 2
+slottime = 10
+ppersist = 40
+fulldup = no
+
+; [bc1]
+; enabled = no
+; serial = /dev/ttyS1
+; kiss_link = /tmp/max25-bcpr/kiss-bc1
-- 
cgit v1.3.1